Engineering Guide Covers BOE NV080WUMN61 8inch WUXGA Display Module

Built on a-Si TFT-LCD technology, the NV080WUM-N61 is aimed at devices that require high pixel density and controlled color reproduction. Its 283-pixel-per-inch density is intended to keep fine image detail sharp. Key parameters are summarized below.

The listed figures include typical contrast of 1,200:1 and typical brightness of 435 cd/m². The panel uses a MIPI interface with four data lanes.

The HADS panel supports 16.7 million colors and 100% sRGB coverage, balancing color accuracy with response performance. Those characteristics suit medical imaging, high-end handheld devices and industrial control terminals, where color fidelity is a core requirement.

Physically, the module measures 3.68 mm thick and weighs 95 g, giving device makers room to integrate it into compact housings. The panel also provides symmetrical 85/85/85/85 typical viewing angles, maintaining contrast and color consistency across directions.

Engineers selecting the module should account for several hardware boundaries before integration.

• Backlight drive: The module does not include a backlight driver. A separate driver must be configured for the 9S3P WLED arrangement.
• Signal interface: The MIPI interface uses four data lanes and requires stable high-speed signal transmission.
• Power supply: The standard operating voltage is 3.3 V, and power circuitry should keep ripple within appropriate limits.
• Backlight lifetime: The backlight system is rated for 15,000 hours. In long-running applications, thermal design should be evaluated to extend service life.

These requirements make the NV080WUM-N61 a display component rather than a complete subsystem. Integration planning should account for backlight driving, power stability and thermal management.

The display is positioned for medical imaging, premium handheld equipment and industrial control terminals. Its 8.0-inch size and 1200 by 1920 resolution are intended for compact terminals that need detailed image display, while the 100% sRGB coverage supports color-sensitive tasks.

With a 95 g weight and 3.68 mm thickness, the module is suited to devices where space and mass are constrained. BOE lists the panel as a pure display module without a factory-installed touch layer.